250 Watts Grid Connected Wind Turbine Power Inverters

250w grid tie inverter

    Built in Dump Load Controller

  • WDL type inverters, designed for DC output wind turbines . WAL type inverters,designed for AC output wind turbines . There are two black terminals on the left side of the inverter , they will be connected to dump load resistors , recommend dump load resistor : 3 ohm/250 watt.
Product Features

This model grid-tie has designed for wind turbines that put out DC/AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

Appearance
  • 250w wind grid tie inverter

    GAIA-250GWAL

WDL : DC input , for wind turbines with rectifiers .

WAL : 3 phase AC input ,inverter whoud be connect to wind turbines directly, without rectifiers .


Technical Data
Type
GAIA-250GWDL
GAIA-250GWAL
Continuous Power Output
225W
Peak Power Output
250W
Input DC/AC Voltage Range
10.8V ~ 30V or 22V ~ 60V
AC Output Voltage Range (Switch at 115V Position)
90VAC ~ 130VAC
AC Output Voltage Range (Switch at 230V Position)
190VAC ~ 260VAC
Output Frequency
46Hz~65Hz
Standby Power Consumption
<1.5W
Total Harmonic Distortion
<5%
Peak Inverter Efficiency
92%
Power Factor
0.99
Output Wave Form
Pure Sine Wave
MPPT Function
Yes
Over Current Protection
Yes
Over Temperature Protection
Yes
Reverse Polarity Protection
Yes
Anti-Island Protection
Yes
Stackable
Yes
Weight ( Kg)
1.9kg
2.0kg
Dimensions (W x H x D)
295 x 190 x 100 mm
295 x 190 x 100 mm
Environmental conditions

Operating Temperature -10°C to 45°C .

Storage Temperature -20°C to 50°C .