15A Wind Turbine Charge Controller

wind turbine charge controller

    12V/24V/36V Battery Auto-Sensing

  • Build In Rectifier . Build In Dump Load Controller . Build In High Wind Protection . Wind Turbine Charge Controller can be used in wind power system, it has three phases AC input terminals, can connect to the three phases wire from the wind turbine directly. It can obtain the power from the wind turbine to charge the batteries to reserve the wind energy.
Security Features

Wind Charge Controller is battery charger that can charge batteries by the power from the wind turbine. The charge controller is intelligent for charging batteries, it has 3 stages of charging batteries, first is current limited to charge batteries, 2nd is voltage limited to charge batteries, and 3rd is compensating to charge batteries. This will prolong the life of batteries.

The Wind Charge Controller has a built in dump load controlling system, it can maintain the rotating speed of the wind turbine and keep the voltage of charging batteries when the wind is too big. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

Technical Data
Battery Voltage
12V
24V
36V
Rated Charge Current
15A
7.5A
5A
Maximum Charge
14.4V
28.8V
43.2V
Dump Load Resistor(suggested)
2 ohm/200W
8 ohm/200W
18 ohm/200W
High Wind Protection
Yes
Battery Reverse
Yes
Short Circuit Protection
Yes
Overload Protection
Yes
Operating Temperature
-5℃ ~ 40℃
Control Method
PWM
Weight ( Kg)
1.7Kg
Dimensions (W x H x D)
295 x 190 x 100 mm
Environmental conditions

Operating Temperature -5°C to 40°C .

Storage Temperature -10°C to 50°C .